Refinishing & Repairs
Ceramic Tile Refinishing
Dated or stained ceramic tile resurfaced in place — a fast, affordable alternative to a full re-tile.
Grout lines that never get truly clean, dated tile colors, and worn glaze are common reasons homeowners consider ripping out tile entirely. Refinishing resurfaces the tile and grout in place with a smooth, durable coating — no demolition, no dust, no missing tile to replace.
It's a great fit for shower walls, tub surrounds, and floors where the tile itself is sound but the look and cleanability aren't. Need tile replaced or supplied instead? See our Tile Supply & Installation page.
- Walls, tub surrounds & floors
- Grout lines sealed & refreshed
- No demolition or dust
- Fraction of the cost of a re-tile
Why Refinish
A Fraction of the Cost, a Fraction of the Time
Tearing out tile means days of demolition, dust that spreads well past the bathroom, and a bill that climbs fast once you're paying for removal, disposal, new tile, and reinstallation. Refinishing skips nearly all of it. Instead of ripping the tile out, we resurface it and the grout lines in place with a durable, tile-grade coating — usually finished in a day and ready to use again shortly after.
For homeowners, that means no re-tiling schedule and no wondering whether the new tile will match the old. For landlords and property managers, it means a bathroom back in service fast, without a full renovation. And because the process works on the tile you already have, the substrate underneath stays untouched — which keeps both the cost and the mess to a minimum.
Save 60–80%
Refinishing typically costs a fraction of a full re-tile, with no demolition, no new tile, and no reinstallation labor.
Done in a Day
Most tile surfaces are refinished in a single visit — far faster than the days or weeks a full re-tile job takes.
Less Mess, Less Disruption
We protect the surrounding floors, walls, and fixtures before we start, and there's no demolition dust or broken tile to clean up afterward.
Built to Last
A properly refinished tile surface holds up to years of daily use when cared for with non-abrasive cleaners — every job is backed by a written warranty.
Before & After
Drag to See the Difference
Tile that's dated, stained, or just tired of being scrubbed doesn't always need to come out. Drag the slider to see the kind of transformation a professional tile refinish can deliver — same tile, same grout lines, just a completely different finish.
Before
After
Tile refinishing is the simplest, quickest and most-cost-effective solution to old, stained bathroom tiles.
Our Process
How We Refinish Ceramic Tile
Every tile surface we refinish goes through the same careful process, whether it's a shower wall, a tub surround, or a full bathroom floor.
Protect & Prep the Space
Before anything else, we mask off the surrounding floors, walls, vanity, and fixtures with plastic sheeting and tape so overspray and dust stay contained to the tile itself. Fixtures and hardware in the way are removed at this stage.
Repair Cracked Tile & Regrout as Needed
Cracked or missing tile pieces, crumbling grout, and loose caulking are repaired before any coating goes on — a coating over a failing substrate never lasts, so this step comes first.
Strip, Etch & Sand
The existing tile and grout lines are stripped of soap scum, oils, and old sealant, then chemically etched and hand-sanded to create a profile the new coating can bond to.
Prime & Spray the Coating
With the surface prepped and the space fully ventilated, we spray a bonding primer followed by multiple coats of a high-solids, high-gloss finish — carefully worked into grout lines, corners, and edges so nothing gets missed.
Cure & Walkthrough
Once the final coat is on, the surface flashes off before hardware and caulking are reinstalled. We walk the finished tile with you and confirm exactly when it's safe to use — typically 24 to 48 hours later.
Where It Works Best
Ceramic Tile Refinishing, Wherever It's Installed
Ceramic tile shows up throughout a home in different forms, and refinishing works on nearly all of it — as long as the tile underneath is structurally sound.
Shower Walls & Enclosures
The most common refinishing job — worn glaze, dulled grout lines, and dated colors resurfaced without removing a single tile.
Tub Surrounds
Tile surrounding a bathtub refinished to match or complement a newly refinished tub for a cohesive, like-new look.
Bathroom Floors
Floor tile resurfaced with a durable, slip-conscious coating built to handle daily foot traffic and moisture.
Kitchen Backsplashes
Dated backsplash tile refreshed with a custom color to tie into an updated countertop or cabinetry.
Countertop Tile
Older tiled countertops resurfaced to a smooth, sealed finish that's far easier to keep clean than grout lines alone.
Grout Lines & Seams
Stained, discolored grout sealed and refreshed as part of every job, so the whole surface reads as one clean finish.
Need New Tile Instead?
When Replacement Makes More Sense
Refinishing works when the tile itself is structurally sound — cracked but intact, worn but not crumbling, dated but not failing underneath. When water damage, extensive substrate rot, or a full layout change is involved, replacement is the better call, and we'll tell you that up front.
For those jobs, Darrell Reicker, our lead tile installer with 20+ years in the trade, handles everything from a single wall to a full bathroom rebuild — subfloor, waterproofing, and tile, start to finish. See our Tile Supply & Installation page for details.
Care & Maintenance
Caring for Your Refinished Tile
A refinished tile surface is durable, but it's not indestructible, and how it's cleaned in the first few weeks matters. Here's how to keep the finish looking new for years.
- Wait before use. Give the coating the full cure window we recommend — usually 24 to 48 hours — before running water on it.
- Skip abrasive cleaners. Scouring powders, steel wool, and harsh abrasive pads will dull a refinished surface over time. Stick to non-abrasive liquid cleaners and a soft cloth or sponge.
- Avoid acidic or bleach-heavy cleaners. Strong acids and undiluted bleach can break down the coating and grout sealant faster than normal wear. A mild, pH-neutral cleaner is the safer everyday choice.
- Squeegee after showers. Wiping down shower walls after use cuts down on soap scum and mineral buildup, keeping the finish glossy for longer between cleanings.
- Avoid dropping heavy or sharp objects. The coating resists everyday wear well, but a dropped bottle or razor can still chip it, just like it could an original glaze.
Testimonials
What Calgary Homeowners Are Saying
"We had our fibreglass shower stall refinished and the results were fantastic. Henry is meticulous in his preparation and attention to details. Our shower stall looks better than new."
— Wayne B.
"We are extremely happy with the reglazing of our soaker tub and shower. Henry was very respectful and accommodating! We would recommend his work!!"
— Sharon, Calgary
"5 star performance! Impressive finished product and very reasonable price. Certainly wouldn't think twice about using them again or referring their work to someone else."
— Elizabeth C.
FAQ
Ceramic Tile Refinishing Questions
Most tile surfaces are refinished in a single visit. Larger areas like full bathroom floors, or jobs that need more extensive crack and grout repair, can take longer since repairs need to fully cure before the coating goes on.
Yes. Cracked tile and crumbling grout are repaired before the coating goes on. If a tile is missing entirely or the substrate underneath has failed, we'll let you know if replacement is the better option instead.
Yes, bathroom floor tile can be refinished with a durable, slip-conscious coating suited to foot traffic and moisture, the same as walls and tub surrounds.
Yes, the coating follows the existing grout lines rather than filling them in, so the tile pattern stays visible — just clean, sealed, and free of the staining that builds up over the years.
With normal care and non-abrasive cleaning, a professionally refinished tile surface typically lasts 10 to 15+ years before it needs attention again.
Yes, there's an odor while the coating is sprayed, similar to fresh paint. We run extractor fans and ventilate the space throughout the job to keep it to a minimum, and it dissipates quickly once the coating flashes off.
Re-grouting only replaces the grout between tiles. Refinishing recoats the tile itself along with the grout lines, so it addresses worn glaze, dated color, and staining on the tile surface — not just the grout.
Yes, every ceramic tile refinishing job we complete is backed by a written warranty. We'll go over the specific coverage for your project as part of your quote.
Ready to See What Your Tile Could Look Like?
Send a few photos and get a fast, upfront quote — no in-home visit required to get started.